Update v1364
- improved rig reporting frequency. After entering rig, it will update its status within 5 seconds. Previously due to small bug in some cases there was lag up to 20s or even up to 60 seconds.
Update v1362
- Fixed NVIDIA temp reading for NVIDIA driver 550.x
- added CUDA 12.4 definition
- Other small improvenments and cleanups
Update v1360
- Added rqminer API CONSOLE stats.
- Improved miner API stats system. Now API stats updates will be released much faster than common updates.
- Improved AMD GPU model names stats readings.
- Fixed init message error when no IP received from DHCP.
- Fixed console GPU and CPU mismatch on older images based on Ubuntu16 (needed once reload miner to fully activate fix).
- Added possibility to mine on CPU without any GPU attached in rig.
Update v1358
- Added Abelminer API stats support
- Added cpuminer-opt-cpupower API stats support
- Added Cubic.li-client API stats support
- Fixed memory/junction temperature readings for NVIDIA
- Fixed Octominer PSU power wattage sum value
- Improved start mining messages for CPU mining in CPU console
- Other small fixes and improvements
Advanced Command update
- Improved stability for reflash command issued with some flash devices
Update v1357
- Fixed OC for NVIDIA - especially on older drivers
Update v1351
- Improved NVIDIA support stats reading and OC
- Added AMD new GPU models definitions
- Other small fixes and impronments
Update v1349
- Added API support for onezerominer
- Fixed nanominer API with zero hashrate in summary value
- Fixed console for SRBminer output display with missing GPU data
- Fixed sending rig system data in some rare cases
Advanced Command update
- Several improvements to the reflash command
Update v1348
- Fixed reload/reboot stats in pause mode
- Fixed OC core and mem locks messages if no values provided
- Added API support do dynexsolve miner
- Added support for new API for Teamblackminer (no need to use "--api-version 1.3" option anymore)
Update v1346
- Added API support for custom miners, but only for supported already by SimpleMining (Custom miner name should be similar like used by SimpleMining. If you prepare custom miner for PhoenixMiner, than use name phoenixminer-xxx.zip, for gminer use gminer-xxx.zip, for TRM use teamredminer-xxx.zip, etc. "xxx" string are any your string. Please remember that using custom miners every resume/reload/reboot/etc causes redownload custom miner package from your server by each your rig because custom miners are not cached on rig's local drives).
Update v1345
- Fixed resume mining from pause
- Added API support for aleo-miner
- Added API support for rigel miner
- Added API support for damomine-aleominer
Update v1344
- New Console parser with better colouring, font, etc
- New nvtool with VRAM temperature readings with newest NVIDIA drivers 520.x
- Other small fixes and improvements
Update v1341
- Shorter GPU model names in rig details
- srbminer-multi API with dual-minnig support
- fixed API GPU ordering for bzminer
- other small improvements
Advanced Command update
- Fixed Reflash Command with no remember WiFi settings after reflashing.
Update v1339
- rig hostname will now be set to rig name which will be visible in ssh and dhcp routers (change will be applied on fresh reboot)
Update v1337
- increased API error message timeout when miner starts very slowly
- fixed duplicate "rig update" messages in console
- fix hashrate ignoring very big (broken values) from miner API
- octominer: improved octominer hardware detection
- octominer: updated binary
- octominer: added autofan (chasis fans) for improve GPU fans work
- octominer: collecting more stat data (fans, psus, temps, humidity etc) - will be presented in dashboard in future
- fixed NVIDIA VRAM temperature readings with zero value or/and freezing stats
- prevent rig stats from some output errors in console
Update v1335
- NEW feature - when you change miner on multiple rigs then all of them would normally download package from internet at once. This was stupid and caused load on your internet connection plus long time to download on slower internet connection or on high number of rigs. With this new feature only few of your rigs will download package from internet and then they will share this package locally via LAN network to each other. This feature works automatically and no additional configuration is needed as always :) In case of any issues with that feature, please contact support
- Changed default download repository. If there will be any low speed issues please let us know !
- NTP servers changed to cloud flare
Advanced Command update
- Reflash Command improved download speed in some cases and with second repository support
- Download and Host command improved also with faster download and second repository support
Update v1334
- Sometimes a (some) miner programs error occurs which causes enormous unrealistic hashrate speeds for some one of few graphics cards. From now on, such values for these cards are reset to zero to prevent exaggerated hashrate charts. Additionally, an appropriate message in the console.
Update v1333
- Disabled non-critical system messages on the LCD (physical monitor connected) to prevent obscuring the screen with unnecessary messages
Update v1332
- added exception in reboot watchdog when using phoenixminer
- changed default time server to time.cloudflare.com as default ubuntu.com server caused for bigger clients problems
- improved removing old miner from rig cache when there is no space left
Update v1331
- Fixed watchdog reboots in some cases on AMD GPUs
Update v1330
- Added new watchdog error definitions
- Fixed watchdog long rebooting without dmesg console content
- Other improvements
Update v1329
- Prevent watchdog from rebooting rig caused by miniz non-critical errors.
- Fixed watchdog not rebooting rig if error occurred in first minutes of uptime rig.
- Fixed API for TeamRedMiner dual mining with displayed values on rig list.
- Added dual mining API support for bzminer.
- Fixed blank screen on LCD monitor on NVIDIA rigs (may require using newest SimpleMining image)
Update v1327
- Added dualmining hashrate display for TeamRedMiner, PhoenixMiner. t-rex, gminer
- Fixed Navi10/12 core and memory clock reading on newest drivers
- Other small fixes and improvements
Update v1325
- Added API support for bzminer
- Fixed API for lolMiner 1.43+
- Faster rig updates
- Added AMD 6500 XT GPU name
- Added new error definition to watchdog system autoreboot
Update v1324
- Added support for BC-160 Memory Overclocking and fixed GPU name
- Updated nvflash to version 5.728.0 (Now supports GeForce RTX 3090, 3080, 3070, 3060 Ti, 3060, 2080 Ti, 2080, 2070, 2060, 1660, 1650, 1080 Ti, 1080, 1070, 1060, 1050 and many more)
- Disk writes speedup (most noticeable change on slow pendrives in faster new miner running, faster updates)
- Added CUDA 11.5 definition
Update v1323
- Basic console parser for danila-miner for (only) summary hashrate value
- Fixed API for srbminer-multi with zero hashrate value on rig lis
- Updated amdmeminfo for proper display some new definitions of RX 580 GPUs
- Updated amdmemorytweak tool for support some new definitions of RX 580 GPUs
Advanced Command update
- OS Reflash (Faster downloading image file. Less library dependencies required on some external systems. Now works even on read-only file systems (eg. broken system))
- Download and Host image (Faster download image file on newest SimpleMining based systems. Now works also on read-only file systems)
เริ่มการขุดด้วย SimpleMining.net
สร้างบัญชี ดาวน์โหลดและติดตั้ง OS ไปยังแฟลชไดรฟ์ และเริ่มจัดการฟาร์มของคุณด้วยวิธีง่ายๆ!